Practical articles for pool owners on skimming, water testing and choosing the right equipment.
28 articles
Water Chemistry · Archive date: · 3 min read
Copper in a pool skimmer is not a dependable algae fix. It can stain surfaces, upset water balance, and should never replace proper sanitation.
Written for PoolSkimmer on Oct 7, 2026; assigned an earlier archive date, not published on that date.
Filtration & Circulation · Archive date: · 3 min read
The right pool filter pressure is your system’s clean baseline, not one universal psi number. A rise of about 8–10 psi often means it’s time to inspect the filter.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.
Filtration & Circulation · Archive date: · 3 min read
Most above ground pool filter cartridges are not replaced on a fixed calendar. Clean them regularly, then replace the cartridge when cleaning no longer restores flow or damage appears.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.
Filtration & Circulation · Archive date: · 3 min read
Buy pool filter sand from pool supply stores, pool equipment dealers, home centers, or trusted online sellers—but confirm the sand filter type in your manual first.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.
Pool Care · Archive date: · 3 min read
An 18-foot round above-ground pool usually holds about 7,000 to 9,000 gallons, but the exact amount depends on filled depth, shape, and freeboard.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.
Pool Care · Archive date: · 3 min read
To keep an above ground pool cool, reduce direct sun, improve circulation, and use shade or other approved cooling methods from your pool manual.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.
Skimming & Debris · Archive date: · 3 min read
Leaves in the pump basket usually point to weak skimmer flow, an off water level, a stuck weir door, or a circulation problem that needs closer inspection.
Written for PoolSkimmer on Oct 7, 2026; assigned an earlier archive date, not published on that date.
Skimmer Equipment · Archive date: · 2 min read
A proper skimmer basket fit helps catch debris, protect circulation, and reduce wear on the skimmer and pump. A mismatch can cause gaps, noise, and poor flow.
Written for PoolSkimmer on Oct 7, 2026; assigned an earlier archive date, not published on that date.
Water Chemistry · Archive date: · 3 min read
After a partial drain, let the refill mix fully, then test pool water and correct balance in the proper order. Avoid guesswork and call a pro if problems persist.
Written for PoolSkimmer on Oct 7, 2026; assigned an earlier archive date, not published on that date.
Skimmer Equipment · Archive date: · 3 min read
Replacing a pool skimmer starts with identifying the failed part, checking compatibility, and deciding whether the housing, throat, lid, or plumbing needs professional replacement.
Written for PoolSkimmer on Oct 7, 2026; assigned an earlier archive date, not published on that date.
Pool Troubleshooting · Archive date: · 3 min read
Pollen in a pool often looks like yellow, green, or tan dust, specks, or a thin film that gathers on the surface, waterline, and skimmer area.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.
Pool Care · Archive date: · 3 min read
For an above ground pool, sand is usually used to help level the ground, not as a deep foundation. The right amount depends on the site and your manual.
Written for PoolSkimmer on Oct 24, 2026; assigned an earlier archive date, not published on that date.